HP160A

Recovery Winches

Rated Line Pull: 160,000 lb (72,575 kg)
Gear Ratio 207:1
Approx. Unit Weight 3,850 lb (1,623.8 kg)
Standard Motor 150/075 (15.0/7.5 CID) 2-Speed,
144 (14.4 CID) Single Speed
Drum Size 11” (279 mm) Barrel x 25” (635 mm) Flange x 24.45” (621 mm) Between Flanges
Rope Diameter 1-1/4” (32 mm)
D/d Ratio (Wire Rope) 9:1
Specifications are representative of common configuration. Consult factory for additional options.

Performance

Layer 1 Layer 2 Layer 3 Layer 4
Line Pull*
LOW

HIGH

160,000 lb
(72,575 kg)
80,000 lb
(36,287 kg)

132,880 lb
(60,273 kg)
66,440 lb
(30,136 kg)

113,620 lb
(51,537 kg)
56,810 lb
(25,768 kg)

99,240 lb
(45,014 kg)
49,620 lb
(22,507 kg)
Line Speed*
LOW

HIGH

14 fpm
(4.3 mpm)
28 fpm
(8.5 mpm)

17 fpm
(5.1 mpm)
34 fpm
(10.3 mpm)

20 fpm
(6 mpm)
39 fpm
(12 mpm)

23 fpm
(6.9 mpm)
45 fpm
(13.7 mpm)
Drum Capacity
1-1/4” (32 mm)

56 ft (17.1 m)

124 ft (37.8 m)

203 ft (61.9 m)

294 ft (89.6 m)
*Based on pressure of 2,500 psi (172 bar), 70 gpm (265 lpm), 1-1/4” (32 mm) rope and 15.0/7.5 CID motor. Actual performance will vary dependent on hydraulic system, motor, drum and cable sizes.

Dimensions